An adventure into the wonderful world of vintage audio restoration and collecting.
Friday, March 23, 2012
Onix OA-21s Amplifier and OA-22 SOAP power supply
Wow. Wow. Wow. Yes there are three there and there should be more. At 60WPC coupled with it's SOAP power supply it just sounds amazing. From it's minimalism design, to it's stunning blue circuit board, quality components and it's absolutely spectacular sound. All this unit would need is some incandescant ambient lighting and a cameo in a Ridley Scott 80's sci-fi movie and it would have it all!
This particular unit belongs to a customer who had brought it to me for a service and repair. Prior to being with the current owner these two units had actually been review units for HiFi Choice or What HiFI magazine in the UK (I can't remember which one!).
This unit is beautifully built, I cannot stress it enough, Solid anodized knobs, ALPS pot for volume and nice and heavy toroidal power supplies. The pre-amplifier for the phono stage could be removed and replaced with either a moving magnet or moving coil pre-amplifier. This unit was fitted with a moving magnet preamp.
The idea of the two units is that you could use the amplifier as a stand alone unit. Using it's toroidal power supply and on-board capacitor bank (originally consisting of 4x 4700uF capacitors a total of 18,800uF) to power the unit. If you added the SOAP or Special Onix Audio Power and connected it through it's umbilical cord to the OA-21 it would provide a dedicated power supply for the power amplifier stage as well as providing an additional 44,000uF worth of capacitors in the form of 2x 22,000uF capacitors. In simple terms you could drive the amp harder, louder and and not have distortion due to the capacitor bank being unable to supply clean DC power instead of 'dirty' power through the bridge rectifier directly. Very very cool!
OA-21 Amplifier unit:
It had two faults with it, the first being intermittent sound out of the phono stage, and the second being a lose input selector knob. The owner also wanted my opinion on giving it a full restoration, in the end we opted to also replace all the electrolytic capacitors in the OA-21s unit, however left the ones in the SOAP power supply alone as they were still in exceptional condition.
The phono sound issue was from the input switch selector having some dirty contacts. In order to do a proper job at cleaning them the switch selector was disassembled and all contacts cleaned individually. The switch selector moving freely was due to a worn collet on the shaft of the input switch selector. A new collet was machined and fitted in, now it switches between all inputs with no 'play'.
Replacing the capacitors was pretty straight forward. The unit could fit my star performers the Panasonic TS-HA filter capacitors rated at 6800uF were fitted in place of the original 4700uF capacitors.
Electrolytic capacitors were replaced with Panasonic AM series, some tantalum and film capacitors were also replaced with Panasonic film capacitors.
Rebuilt phono board:
I also ran into a small issue with the power connector on the OA-21 unit. It was producing some small amounts of arcing when powering on. The surface area of the plug going into the main board wasn't enough to supply the power across without arcing, so I opted to remove the plug completely and solder the power connector from the toroid directly to the board.
Overall the repair and restoration process was pretty straight forward, all solder joints were painfully redone as there were signs of cracked or partially cracked joints, the mica film and thermal paste were also replaced on the main output pairs. A couple of resistors were replaced that had shown signs of heat fatigue with resistors that could handle a bit more power.
The sound is phenomenal. Very clear with just the right amounts of bass and treble applied. My testing speakers were a pair of JBL 240Ti and Marantz HD880s. This is when the SOAP power supply really could show it's stuff. Without the SOAP, the sound is pretty damn fine, turn it up a bit too much though and you can hear a slight drop off in the deeper and more complex pieces. Plug the SOAP in and fire her up, wow! It doesn't even break a sweat! As always though, sound is subjective :) Results may vary from person to person but I certainly was extremely impressed at what this unit could deliver.
Modeling pictures as always, comments and questions always welcome!
Subscribe to: Post Comments (Atom)
Fired up my OA21 for the first time in 10 years the other day. Built like a nuclear trigger. Love it. Would kill for a SOAP.ReplyDelete
sir: I have an SOAP in great condition. I lost the connecting cable when I moved. I'm asking $250.00. it was barely used an hour. send any message to email@example.comDelete
Hi ! I have those two units working fine. I want to recap them. Can any one help me out ? firstname.lastname@example.orgDelete
I must admit I love this unit! Was sad to see it go but it definitely was something special. The SOAP makes a huge difference. However if you can't get your hands on one, there are plenty of guides on how to make your own DIY SOAP unit. aesthetics aside it's worth a look!ReplyDelete
My OA36 pre amp and OA1200 power amp still producing wonderful sound.My OA21+Soap after 15 years,is still kicking and put new branded amps to shame ....TQ Tony Brady,May God Bless You.
Yes, how did you know?Delete
I`ve been reading about your Company, OnixDNA, saw your name there.Delete
A few yrs ago was in a music shop in Singapore which had a Onix as well as a Naim 5i driving a pair of Magneplanar 16's each.ReplyDelete
Thought the Onix sounded much better than the Naim then.
Went back there to listen to the Maggies a few months later and discovered the Naim's had to be service as they turn the volume past noon for the Maggies. The Onix was still going strong!
Have a OA20/2 myself. Kept it and sold my Nait1 a while back.
Are you Adam Worsfold too?Delete
Beautiful sound, so open with a perfect range and balance, Oh how I miss my OA21, never should of sold it all those years ago. Great Amp they just don't make then like that anymore.ReplyDelete
Nigel Thornton, Devon, EnglandReplyDelete
Tony and Craig at Onix were a great design team, they made some really fine-sounding products with great looks , especially the OA20 and OA21. Such a shame it all went downhill when Adam took over the business. I`d love to find a pristine OA21 and soap, bet they would be a match for anything similar today.
Nigel Thorton... please be brave enough and call me yourself, My name in Adam Worsfold my numbers are on our site to discuss your misinformed and clearly misguided ideas of history. I await your call, of course if you would prefer visit me at our new plant in Singapore to see for yourself some facts you have no idea of.Delete
I have both the soap and the OA21 in our new facility and you can buy them if you like but be warned I personally built each one of these alongside most others that ever existed on the planet whilst I owned the company .
Things went to ratshit when Adam took over Onix back in the day and also when he later tried to resurrect it. He's now failed again as Onix GB Ltd and he has resigned as a Director to hide the fact that he cocked it all up. Adam talks the talk, but when it comes to delivering, he falls flat on his face and buries his head in the sand like an ostrich and hides away behind his other companies like the chicken he is.Delete
Adam Worsfold's OnixDNA amps were just copy circuits based from the original designs of Tony Brady, the original and real brains of the original Onix circuits and Craig's excellent casework design and marketing strategy.
Adam failed to supply paid-up customers in 2020 with the Onix OA21 Icon as promised and left them all in the lurch. He took all the payments before going to ground. He's now sold the Onix brand name to the "Chinese Copy Company" Shanling and started a new company as OA21 Ltd where he hopes to again sell those OA21 Icon amps and OnixDNA copy circuits. But this time around, due to his past failures, he has struck a deal with Shanling (who he once dispissed) to build them for him. Hopefully, there will be very few takers for them.
I am looking for a SOAP FOR A Brand New OA21 I just bought...still in original carton. If you have one with cables please email me at:ReplyDelete
Hey guys I have an original narrow-bodied OA20 amplifier serial no 1036 (used, but still in its original Onix box), that I bought from a HiFi shop in Reading back in the 1980s. I loved it for its clear sound and its minimalist looks, but now it's time to part company. It's not mint condition, but it's still beautiful. Could anyone tell me what it's worth today or if they'd be interested in purchasing it from me. Thanks...ReplyDelete
I am purchasing a NOS OA-21. It looks like there is a seller in FL, USA that had a few of these for sale. With these units being ~30 years old now is it recommended to replace all the electrolytic capacitors? Should I do this before even using the unit or is this only necessary if there is a problem?Delete
Great review, loved the photos and walk through of the repair. They simply don't make em like they used too.ReplyDelete
Finally obtained and fired-up an OA-21 and SOAP that my wife's business had lying around unused (and that I had my eye on) for years.ReplyDelete
Sounds fantastic, even compared to the NAD 350 that used to be in it's place.
Any idea what these are worth?
Hi. Sent you an email as well. I have a DA21 with a weak right speaker output. Thing has worked great for many years (bought it used in 87) then, last year, the fuse blew for the right speaker output. Fixed the fuse, worked great. Moved cross country, now is weak again and the fuse is fine. Left is and has always been fine. Any ideas on where to start to look? (cleaned everything I could see)ReplyDelete
I would love to find an OA21s and SOAP, if there is a set out there.ReplyDelete
Hello there from Athens Greece.Delete
I have set of Onix OA21s with SOAP power supply that I use it as my transistor amplifier in my set up. I also use tubes most of the time. They drive big Tannoys 15' dual concentric GRF Memmory TW. If you like I am willing to sell the two ONIX units send me an email if you like email@example.com
Do you still have the set? I'm searching for a Soap 2 since i have a OA21s but i could be interested in both if the price is right.
Hi, I have a Onix OA21S and SOAP. The interconnecting cable has red sleeving on one end which I believe indicates whether to connect to OA21S or SOAP. Can anybody tell me which end? Would hate to get it wrong and don't have the instructions.ReplyDelete
I had an Onix OA21, bought new in the mid 80s as I recall, when Craig was involved with the company. Craig also had a hi fi shop and I bought the amp from Brighton Hi Fi and Cassette Centre, run by Craig and his father Arthur. (There was also a Reading Hi Fi and Cassette Centre in those days).ReplyDelete
I loved the amp of course and had many long hi fi chats with Craig and Arthur.
Does anyone know what Craig is doing these days?
Since OA20 was my fisrt "Hi End" ampli as young men, I started to look after used ones in order to "re-build" my first stereo chain again. Currently I am owning a OA22 fully serviced, a SOAP 2, a OA21s and a BWD1 Tuner.ReplyDelete
The only part missing is a inteconnect (power) cable from Soap2 to my OA21s.
Any one who could help me (sell) such a cable/interconnect, or does have ideas of how to get one?
Thanks from Switzerland
Hi, i am looking for the same cable as you. Any chance you found it? Any idea what are the connections? Would be grateful if you could reply to me at firstname.lastname@example.orgDelete
Hi guys I have been very curious about the Onix 21 with soap that has been raving about and very much would like to get one if anyone has one to let go. Currently I am using Nytech CA252 and had use Naim 72/180/Hicap before this. Am totally blown off when Adam mentioned you have a plant in Singapore?ReplyDelete
My email email@example.com
Hello everybody. I have an Onix OA-21s Amplifier since the time I was a student. Then around 10 years ago, I moved fro Germany to Bangkok and step by step I also brought my things here, which meant something to me. So I have my amplifier and boxes here now and in the start everything worked fine. But in the last months I noticed increasing disturbances in the right channel, up to the point that there came nothing out of the right speaker any more. I do not know any company in BKK, who could do a necessary service and repair on my amp, but I come to Singapore sometimes for work. So is there somebody in SG who could take care of my amp, giving him a good maintenance? Or, even better of course: does anybody here knows an address in BKK, where somebody competent can have a look at my beloved amp? Thx very much in advance for incoming tips...StevenReplyDelete
Your Amp is almost certainly in need of a new slide switch or a good clean . We as the original manufactuer will be happy to service it for you but we are in the UK .Delete
If you would like to visit our site its www.onixdna.com and we are the original ONIX ( not the Chinese Cheats ) we can renovate the amp to its former glory but realistacly only at our facility .
If we can help contact us
That sounds interesting. I come to Germany every year for visiting trade shows and sending my amp to an address in Great Britain would be possible. Anyhow my trip will bring me to the northwest of Germany as well. Can you say me roughly how much a maintenance can cost and how long it takes? This, because I traveled as a young man almost every country in Europe but never England. I could think of visiting you and just wait for the repair of my amp. Through the times in Asia I have some contacts in England, Scotland and Ireland and probably can connect fun with the chance to get my good old ONIX back quick. Then I can still take him hopefully as cabin luggage back to BKK. Best Regards from Uwe.Delete
By the way: my real name is Uwe, but people in other countries always have problems to pronounce my name correctly - so I choose my private nick name "Steven", which almost everybody uses (aside my business contacts of course).Delete
I'd like to bring my amplifier to your company for maintenance around 20th of July. Please let me know your company address and opening times. Mail to firstname.lastname@example.org Thank you.ReplyDelete
I am an Onix OA21 with SOAP I am parting with if anyone is interested in purchasing it. The SOAP is 240 but I have a big step down transformer and it works great. I haven't used them for about 10 years, but I have recently fired them up and they sounded great. I can be reached at email@example.comReplyDelete
I am trying for a while now to contact you. I have to plan my trip to England in July, so that I can give you my amp for repair, maintenance. Would you please send me a mail with your location and opening times. Mail to firstname.lastname@example.org please.ReplyDelete
Hi there, I just wondered if anyone could help me out with some information on the Onix AudioReplyDelete
T-soap power supply, namely if this supply is multi voltage compatible, and could be used with a 120v mains supply found in th US without modification? There's no mention of voltage on the supplied operating instruction or the casing itself, however I have noted that on some of the later Onix Audio equipment there was sometimes info on the back pannels indicating 120-240v voltage range compatibility, this is somewhat haphazardly done as it does not appear on all equipment back panels, and sometimes took the form of a paper sticker ( like their serial numbers ) and somtimes screen printed like the rest of the information.
I managed to buy a second hand Onix 0A 21 in 1996. At the time I was a Mission Cyrus II user so I was very keen to compare the two. Although the Cyrus amp was known for its detail and tight controlled sound the Onix won out right for it’s open warm feel and more weighted bass detail. My Monitor audio 352’s speakers now working independently with great separation and detail.ReplyDelete
So I traded in the Cyrus for a half decent second hand turntable
I did discover there could be a way to speed up the overall response for the Onix amp but I would need to replace the four TO3 output transistors with much faster ones.
I noticed the original output devices where the Motorola MJ15003 & MJ15004 complimentary pair for each channel and where much capable of providing lots of power / current and where the same ones frequently used by Quad Ltd UK for their power amps around the 1980’s. These where great quality amps and powerful but were sometimes considered by critics to sound a little soft or laidback. a plus for some types of classical music but not if you listen to rock/ heavy metal.
I believe the problem lies where good large amounts of power / currant provided by this transistor will always be at the expense of a slower switching frequency’s by which these devices will operate at
I researched high and low to try and find a fast complementary pair of TO3 package output transistors with the same spec but would switch much quicker than 2MHz Motorola device spec. And for my patience I finally discovered some from a semiconductor company based in Leicestershire UK.
The specifications mirrored that of the Motorola MJ’s but with one significant difference these transistors have a switching frequency of 10MHz which is quiet rare for a high power T03 package transistor anywhere.
SM3160 & SM3159 Both are a complementary pair for each channel
They retail around £10 each but the cost is well justified for the improvement.
I fitted them with ease but was aware I may or may not need to replace the small thermal bias transistors that share the heat sink. It turned out it wasn’t necessary.
I did check and adjust the correct bias required for the new transistors via the two black pre-sets opposite the heat sink. Lid back on and job done.
Can you tell me what difference the new transistors made to the amp'sDelete
sound, and the name of the supplier. ? Jim in Canada
A much tighter and articulated sound although a slight drop in bass weight but I believe a price worth paying for the overhaul detailed improvement.Delete
The pdf web link below will give you the info for the manufacturer of these to3 devices. (Seme lab)
This comment has been removed by the author.ReplyDelete
The distinction amongst half and full stacks is that, in the previous, there are four little speakers in the bureau and in the last mentioned, there are four speakers with a vast speaker in another bureau. AmplifierExperts.comReplyDelete
What the hell you talking about?ReplyDelete
Jenni you need to improve on your poetry its bad okReplyDelete
My Onix OA21 & Soap(Both Made in England) still producing excellent,warm & punchy sound.I paired it with Rega Planet CD Player and Mordaunt Short Mezzo 6 floorstander.Bravo(stand up ovation) to Tony Brady for the invention.ReplyDelete
One happy Onix owner from Asia.
Have a ONIX on-21s and a soap 2 power supply for sale let me know if any are interested. Great Condition!ReplyDelete
Hi I'm interested, what's your price for both?Delete
Hi did you sell your Onix and SOAP 2?Delete
I have the pair in excellent condition and recently serviced, for sale too. If anyone is keen to purchase please leave me your contact details. Thanks.Delete
Hi. I have a ONIX OA-21s amplifier and I am looking for the Soap power supply and the connection cable. Where can I find sReplyDelete
these 2 parts in the internet?
I have a pair of these with it’s cord for sale. The set is still in very good condition and works flawlessly. This set is located in Asia. Any keen buyers?ReplyDelete
Hi, i am keen. Am in Singapore. Where about are you? You can email me at email@example.comReplyDelete
high voltage film capacitors Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info.ReplyDelete
Hi, I hope everyone on here is well? Anyone have a SOAP 1 or 2 that is surplus to requirements? I live in the UK.ReplyDelete
Interesting… catch me on firstname.lastname@example.orgReplyDelete
Misread your post… though you said you had one! Soz.ReplyDelete